Although it may appear easy to clean grout from bathroom tiles, it can be difficult. Grout’s porous nature means that it absorbs everything that is placed on it. It is possible to get grout back to its original white color. It is important to use the right products and materials to clean grout.
Grout is a mixture of water, cement and a colorant. It depends on the shade you choose. White, cream, gray and other shades are the most popular grout colors. Grout is used for securing bathroom and floor tiles. Grout is often in high-traffic areas with high moisture levels, so it can easily get dirty. Below are the steps and a list of materials that can be used to clean grout.
- What you will need
- Rubber gloves
- Scrub brushes
- Flat mop
- Grout and tile cleaner
- Grout sealant
You don’t need to have all these tools to clean grout. Some jobs are easier than others and require only a small amount of water and a brush. Grout with a long history of staining or hard-staining products might need extra attention.
Never Miss: important tips for local seo
How to clean grout tile in 6 steps
1. Get started with water
To remove grout stains, use hot water and a bristle scrubber. You should get rid of dirt and other superficial stains to make way for deeper cleaners.
2. Use grout cleaner
While you learn how grout is cleaned, be sure to protect yourself. Use a chemical cleaner with gloves. Spray grout cleaner on the stained area. Hydrogen peroxide and bleach can also be used. Be aware, however, that bleach can cause grout to turn a yellowish color, sometimes unevenly.
Mix one part vinegar with one part water to make a cleaner for your floor tiles. Sprinkle baking soda around the tile lines. Let the baking soda soak in the vinegar solution for at least one minute.
Use cleaners that are waxy or acidic to clean grout. You can use vinegar-based cleaners or anything that cleans wood. Grout is destroyed by acidic cleaners, which can cause holes and other damage. Over time, waxy cleaners can cause discoloration and damage.
Most Popular: house relocating strategy before you relocate
3. Rinse the cleaner and scrub it.
Use the sponges and scrub brushes to clean grout areas where cleaner was used. Cleaners should be able to pull out dirt and stains so that they can be washed away. The cleaner should only be left on the surface for the required time. If you don’t get the results you want, apply again.
Use cleaner to clean the floor.
4. Seal the area with sealant
Spraying grout sealant can prevent grout from becoming porous. These products fill in cracks and holes in grout, without making it worse. To avoid causing damage to the tiles around you, be sure to follow the directions.
5. Steam cleaning
While professionals are trained to use a steamer cleaner, you can do it yourself. You can rent a steam cleaner from Lowe’s and Home Depot. Steam cleaning is safe to tile grout and tile work, but it should be kept away from painted walls and wooden baseboards. It is safe to steam clean tile floors without using chemicals.
6. It can be dried
Once the sealant and cleaner have been applied, you need to inspect the floor for any signs of moisture. Make sure to wipe any areas that are still wet. Any liquid that sits on top of grout is more likely to be absorbed.